|
| |
Sheet Layout
Overview
Typical Sheet Layout
Typical Title Block
Typical CD Set
 | Sheet Size:
|
The two standard sizes of large drawing sheets used by Ellerbe
Becket for E and F Phase drawings are 42" x 30" and 42" x 34". They
are available as menu selections on CAD. Unless required by a client, do not use other
sheet sizes.
| Title Block Information and Legends:
|
Located along right side of sheet and provides a consistent location
for the title block, key plan, revision block, signatures, legend notes.
| Graphic Information:
|
Primary drawing field contains graphic information (plans,
elevations, sections, details, schedules, etc.). The graphic area is subdivided into
modules permitting 8-1/2" by 11" small sheet drawings to be incorporated into
the large sheet grid. Module size is constant for all sheet sizes.
| Perimeter Margins:
|
A perimeter margin is defined to prevent drawing information from
being lost due to bindings and damage to the edges of sheets. Do not draw in the Margin
area.
|
Revisions
Identifies revision made to each sheets with Delta
Number and date. |
|
General
Drawing Notes
Locate Drawing Notes below the Revision column when
possible or on right hand side of sheet next to the Revision column when Notes are to
lengthy for allow space. |
|
Certification
Seals or blocks are placed above the Key Plan.
Verify the size and number of Seals required to allow enough room. |
|
Key
Plan
Locate key plan in above the project name, include
standard North Arrow Indicator placed near the lower right corner. |
|
Project
Name
Developed by Project Team in concert with the Owner.
Typically include client's name, building name, address of the building, and logo where
appropiate.
|
|
Title
Blocks
Ellerbe Becket's standard title block is available
on preprinted sheets for manual drafting and as a CAD block for Xreference into AutoCAD.
Use title blocks on all drawings for Phase D, E, F with information completed. 1. If a
custom title block is required, verify all information on the standard Title Block
can be included on the custom boarder.
|
 |
Drawing
Titles
Use titles which describe the overall drawings, do
not repeat individual detail name for overall drawing title. |
 |
Scale
Indicate drawing scale in space provided within
title block, if entire sheet is drawn in the same scale. On detail drawings and on sheet
with drawings of several scales, indicate scales at each detail or drawing title. |
 |
In Charge, Drawn by
& Checked By
Names should be entered as the first letter in the first name and
the full last names.
In Charge = Person signing the
drawing package.
Drawn By = Person designing or drafting (person
who can answer questions regaurding the drawings)
Checked By = Is usually the
Project Manager or Job Capt. |
 |
Sheet Numbers:
See Plot Sheet Series
Numbers By Discipline. |
| Pulldown Menu "Annotation/Large Sheet" |
 |
|
|
| |
|
